Yorkstone Setts & Cobbles: The Complete Guide
Setts are among the oldest paving units in Britain still in everyday use. Small, thick, hand-sized blocks, laid tight in courses or fans, they surfaced the streets and yards of the industrial north — and reclaimed setts are exactly that: stone lifted from older streets and yards and sold again.
This guide covers what setts are, the three types we stock, what they cost, how much you need, and how to lay them.
What is a sett?
A sett is a small block of natural stone, roughly cubic or brick-shaped, laid as a paving unit. The word gets used interchangeably with "cobble", but strictly they are different things: a true cobble is a rounded, water-worn stone, while a sett is quarried or split to a broadly regular shape with flat faces. Almost everything sold in the UK as "cobbles" is in fact setts.
What makes them worth the trouble is the joint count. A square metre of setts has many times the joint length of a square metre of flags, and every one of those joints is a place for the eye to catch. That is why a sett driveway reads as handmade in a way that a slab driveway never quite does — and why they suit period property, courtyards, and any scheme where the paving is meant to look older than the house.
The three setts we stock
Reclaimed Yorkstone setts
Our reclaimed Yorkstone setts are lifted from older streets and driveways and supplied tar and concrete free. That matters more than it sounds: reclaimed setts that still carry old bitumen have to be cleaned on site before they can be laid, and that is slow, filthy work.
They carry the deepest weathering of anything we sell — grey-green faces, worn arrises, the odd tool mark. Also available in 4x4 cubes.
Tumbled Yorkstone setts
Tumbled Yorkstone setts are one of our best sellers. The tumbling softens the faces and edges, giving a clean, simple finish that still has the strength to take regular passing traffic. Available in Scoutmoor, Mayfair Blue and Kensington Buff — please enquire for current availability, as the three do not always run together.
Reclaimed granite setts
Granite is the harder, denser option, and where traffic is heaviest it is the sensible one: see our reclaimed granite setts.
What setts cost
| Sett | Price per m² (ex VAT) | Price per m² (inc VAT) | Coverage |
|---|---|---|---|
| Reclaimed Yorkstone setts | £55.00 | £66.00 | 1 tonne ≈ 3.5 m² (1 pallet) |
| Tumbled Yorkstone setts | £62.50 | £75.00 | 1 tonne ≈ 8 m² (1 pallet) |
| Reclaimed granite setts | £68.00 | £81.60 | 1 tonne bag ≈ 3 m² |
Prices are per square metre and correct at the time of writing. Setts are ordered by area — every sett product page asks how many square metres you need and works the rest out for you.
Why the coverage figures differ so much
Look at the coverage column again: a tonne of tumbled setts covers roughly 8 m², while a tonne of reclaimed Yorkstone setts covers roughly 3.5 m². That is not a mistake, and it is the single most useful thing on this page.
Coverage per tonne is a function of how thick the setts are: a tonne is a fixed weight of stone, so the thicker the sett, the fewer square metres that tonne will cover. Depths vary by product and by batch, so treat the tonnage as a delivery and handling figure and check the actual depth of what you are ordering.
The practical consequence: never budget a sett job by the tonne. Work in square metres, price in square metres, and treat the tonnage only as a delivery and handling figure.
How much do you need?
Measure the area in square metres and add 5–10% for cuts and wastage. Setts generate more waste than flags because you cannot slide a course along to absorb an error — every row has to close on the edge, and the last sett in a run is frequently a cut.
Two things push you towards the upper end of that allowance: curves, and fan or radial patterns. Both force a lot of tapered cuts. If you are laying a straight running-bond driveway with square edges, 5% will usually do it.
How to lay setts
- Excavate. Dig out to allow for your sub-base, bedding and the depth of the setts themselves. Because sett depth varies between products and batches, measure a representative sample from your actual delivery rather than working off a nominal figure.
- Sub-base. Lay and compact hardcore. For a driveway carrying cars this is the layer that does the structural work; skimping here is the usual cause of a sett drive going wavy after a winter.
- Bedding. A semi-dry sand and cement bed, screeded level. Setts are individually bedded, so the screed is a guide, not a finished surface.
- Set out. Establish your pattern and your edge restraint before you lay a single sett. Running bond, fan, or coursed — decide now. Fans in particular need their centres marked out first.
- Bed each sett to its face, not its base. This is the step that separates a good sett job from a poor one. Because setts vary in depth, you bed each one individually so that the top faces line through. Tap each sett down onto the bed until its face sits with its neighbours.
- Joint. Traditionally a sand and cement joint, brushed in and struck. Setts take a wider joint than flags — the irregularity of the stone is part of the look, and trying to close the joints up fights the material.
- Leave it alone. Keep traffic off until the bedding and joints have properly cured.
Maintenance
Very little. Stone setts do not fade and do not need sealing. Moss and algae will colonise the joints on a shaded, damp area — some people spend every spring removing it, and some people consider it the entire point of buying reclaimed stone in the first place. A stiff brush and a dry spell deals with it either way.
The one thing worth watching is the joints. If pointing starts to crumble out in a trafficked area, rake it back and repoint before water gets down into the bedding.
Setts and the rest of the scheme
Setts rarely stand alone. They are used as edging and banding to Yorkstone paving, as a full driveway surface up to a flagged threshold, and as a hardwearing apron in front of gates and garages. If you are matching setts to a wall as well, see our dry stone walling.
For the wider background on weathered stone — where it comes from, how it is graded, and what to look for — see our reclaimed Yorkstone guide.
Frequently asked questions
What is the difference between setts and cobbles?
A cobble is strictly a rounded, water-worn stone, while a sett is quarried or split to a broadly regular shape with flat faces. In practice the UK trade uses the two words interchangeably, and nearly everything sold as "cobbles" for paving is actually setts.
How many square metres does a tonne of setts cover?
It depends entirely on the depth of the sett. A tonne of our tumbled Yorkstone setts covers approximately 8 m², while a tonne of our reclaimed Yorkstone setts covers approximately 3.5 m². Coverage per tonne depends on how thick the setts are, so it varies by product. Reclaimed granite setts are supplied in 1 tonne bags containing circa 3 m². Always order by the square metre rather than by the tonne.
Are reclaimed setts free from tar and concrete?
Our reclaimed Yorkstone setts are completely tar and concrete free, which allows fast and easy application on site. Reclaimed setts that still carry old bitumen have to be cleaned before laying, which is slow work.
Can setts be used on a driveway?
Yes — setts were originally laid for far heavier traffic than a modern car. The critical factors are a properly compacted sub-base and individually bedding each sett to depth so the top faces line through. Granite is the denser option where traffic is heaviest.
How much extra should I order for cuts and wastage?
Add 5–10% to your measured area. Straight running-bond layouts with square edges sit at the lower end; curves and fan patterns need the upper end because they force a lot of tapered cuts.
Ask us before you order
Sett sizes and depths vary batch to batch, particularly with reclaimed stone, and it is worth checking with us before you order — especially if you are matching into existing paving. Contact our team and we will tell you what is available now.